AMCC 720-0140-00 Installationsanleitung PDF herunterladen (Seite 87)

Enclosure Object Commands

www.3ware.com 81

show fans

This command lists the fans in enclosure /ex and shows their status. Possible

statuses are OK and Unknown.

Example:

//localhost> /e0 show fans

Fan Status

----------------------

fan0 OK

show temp

This command lists the temperature sensors in enclosure /ex and the current

temperature.

The maximum temperature for successful use of a drive should be noted in the

documentation for the drive.

Example:

//localhost> /e0 show temp

TempSensor Temperature

-------------------------------

temp0 24~C(75~F)

show all

This command shows the current settings of all attributes for enclosure /ex.

/slot

show

This command shows information about the specified /slotx on the specified

enclosure /ex. The slot name is followed by its status. If a slot has been

inserted with a drive and no fault has been detected, the status is OK. If the

slot is empty the status would indicate NO-DEVICE. The port that is

correlated to the slot is indicated in the next column. If no device is found in

the slot, that is indicated with a dash (-) in the Port column. The final column

shows whether “identify” is currently set for the specified slot.

Example:

//localhost> /e0/slot1 show

Slot Status Port Identify

----------------------------------------------------

slot1 OK /c0/p1 Yes

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 93

Keine Kommentare

AMCC 720-0140-00 Installationsanleitung Seite 87