AMCC 3WARE 9500S Betriebsanweisung PDF herunterladen (Seite 171)

Locating a Drive by Blinking Its LED

www.3ware.com 161

3 Check the boxes next to the self-tests you want to be performed.

To disable self-tests

Unlike scheduling of rebuilds and verifies, scheduling of self-tests is always

enabled.

To disable self-tests you must either remove all schedule times, or uncheck

the tests listed in the

Tasks column.

Locating a Drive by Blinking Its LED

You can easily identify the drives in a unit, or an individual drive, by causing

the LEDs associated with the drives to blink.

When you have drives installed in an enclosure that has an integrated AMCC/

3ware CCU (chassis control unit) and have connected the I

C (chassis

control) connector on the 3ware RAID controller to the chassis, you can

locate individual drives by blinking their associated LED.

You can issue the command to blink the LED through 3DM.

(For details about what the different LED patterns on the enclosure mean, see

“Enclosure LED Status Indicators” on page 135.)

To blink the LED for a drive

1 Do one of the following:

• Choose

Information > Drive Information from the main menu in

3DM. On the Drive Information page, identify the drive you want to

physically locate.

• Choose

Monitor > Enclosure from the main menu in 3DM. On the

list of enclosures, click the ID number of the enclosure. On the

Enclosure Detail page, identify the drive you want to physically

locate.

2 Check the box in the

Identify column.

Note: Drive Locate is supported by some chassis vendors. This feature requires a

chassis with a Chassis Control Unit (CCU) designed according to AMCC/3ware

specifications. Check the 3ware support web site for future updates on a list of

chassis vendors that support the CCU, as they become available.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 301 302

Keine Kommentare

AMCC 3WARE 9500S Betriebsanweisung Seite 171