AMCC 3WARE 9500S Betriebsanweisung PDF herunterladen (Seite 35)

Basic Steps for Creating a Unit

www.3ware.com 25

1 Use the arrow keys or press Tab to move to the Boot Volume Size field.

2 Press Enter to display a text box.

3 Enter the size in Gigabytes that should be assigned to the boot volume.

4 Press Enter again to accept the size.

To confirm unit configuration

1 Press Tab to select the OK button and press Enter to confirm creation of

the unit.

Or, if you want to cancel the creation of the unit, tab to Cancel and press

Enter.

2 If you leave the Unit Write Cache field enabled and do not have a BBU

installed, 3BM will ask you to confirm that you want enable write cache.

The unit is not actually created and no data is overwritten until you have

finished making all your changes and press F8.

3 If the volume summary screen appears, review the information and press

any key to continue.

Multiple volumes will be created if you entered a Boot Volume Size of

greater than zero (0), or if auto-carving is enabled and the combined size

of the drives in your unit is large enough to divide it into multiple

volumes. For more information about auto-carving, see “Using Auto-

Carving for Multi LUN Support” on page 86.

Note: Setting a Boot Volume Size is optional. In addition, if you specify a boot

volume, you do not have to install your operating system onto it. For more

information about creating a boot volume, see “Boot volume size” on page 94. If the

size your array is 2TB or greater, you may also want to review the information about

carving the unit into multiple volumes. For details, see “Using Auto-Carving for Multi

LUN Support” on page 86.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 301 302

Keine Kommentare

AMCC 3WARE 9500S Betriebsanweisung Seite 35