AMCC 3WARE 9500S Betriebsanweisung PDF herunterladen (Seite 63)

Driver Installation Under FreeBSD

www.3ware.com 53

8 At the FreeBSD boot menu, select "Escape to loader prompt.”

9 At the loader prompt, load the kernel driver module by typing

load disk0:twa_96se.ko (assuming disk0 is the floppy drive)

Then boot, by typing

boot

Now that you have installed the twa_96se.ko kernel driver module and you

are up and booted into FreeBSD, the next step is to upgrade the kernel with

the latest 3ware kernel driver sources.

10 Once the system boots up, replace the twa driver sources at

/sys/dev/twa and /sys/modules/twa with the new sources that

have 9550SX/9590SE/9650SE support, for the OS version being used.

The sources for the new kernel driver module for FreeBSD 6.1 can be

found on both the 3ware CD-ROM and the 3ware website.

For step-by-step instructions, see “To update the kernel with new driver

source” on page 53.

11 Build the kernel with the new driver sources.

For help with this, see http://www.freebsd.org/doc/en_US.ISO8859-1/

books/handbook/kernelconfig-building.html.

12 Reboot your system.

To update the kernel with new driver source

1 Copy .c and .h files to

sys/dev/twa and makefile to sys/modules/

twa

2 Go to /usr/src/sys/conf/ and edit the files file (use vi or any other editor)

a Remove these lines:

twa/twa.c

twa/twa_cam.c

twa/twa_freebsd.c

twa/twa_fwing.c

twa/twa_globals.c

b Replace them with:

twa/tw_cl_fwimg.c (omit this if using code set 9.3.0.4 or newer)

twa/tw_cl_init.c

twa/tw_cl_intr.c

twa/tw_cl_io.c

twa/tw_cl_misc.c

twa/tw_osl_cam.c

twa/tw_osl_freebsd.c

c Save changes.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 301 302

Keine Kommentare

AMCC 3WARE 9500S Betriebsanweisung Seite 63