AMCC 3WARE 9590SE Betriebsanweisung PDF herunterladen (Seite 102)

Chapter 2. CLI Syntax Reference

96 3ware Serial ATA RAID Controller User Guide

/cx/ex/fan

set identify=on|off

This command is used by 9690SA controllers.

This command causes the fan to be identified by blinking the LED associated

with it, or turns off identification of the LED for this fan.

Setting identify to on will cause the LED associated with that fan to blink.

Example:

//localhost> c0/e0/fan1 set identify=on

Sending Identify request to Fan c0/e0/fan1 to [on] ... Done.

/pwrs

show

This command is used by the 9690SA controller.

This command shows the information about the specified power supply

element /pwrsx in the specified enclosure cx/ex. The power supply name is

followed by its status. The possible status values are OK, OVERTEMP-

FAILURE, OVERTEMP-WARNING, DC-FAIL. and AC-FAIL. The possible

Voltage and Current values are OK, OVER-WARNING, and UNDER-

WA RN ING.

If a power supply is on and no fault has been detected, the status would

indicate OK.

/cx/ex/pwrs

show identify

This command is used by 9690SA controllers.

This command shows the identify status of the specified power supply The

status can be either on or off.

Example:

//localhost> c0/e0/pwrs1 show identify

c0/e0/pwrs1 Identify status = on

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 108 109 110

Keine Kommentare

AMCC 3WARE 9590SE Betriebsanweisung Seite 102