AMCC 3WARE 9590SE Betriebsanweisung PDF herunterladen (Seite 97)

Enclosure Object Commands

www.3ware.com 91

Enclosure Object Commands

Enclosure object commands provide information and perform actions related

to a specific enclosure, such as /c0/e0 and its elements, such as /c0/e0/slot0.

Enclosure object elements include slot, fan, and temperature sensor elements.

These commands are supported on 9690SA controllers.

Syntax

/cx/ex show

/cx/ex show attribute [attribute ...] where attributes are:

controllers|diag|slots|fans|temp

/cx/ex show all

/cx/ex/slotx show

/cx/ex/slotx show identify

/cx/ex/slotx set identify=on|off

/cx/ex/fanx show

/cx/ex/fanx/ show identify

/cx/ex/fanx set identify=on|off

/cx/ex/fanx/ set speed=<0|1|2|3|4|5|6|7>

/cx/ex/pwrsx show

/cx/ex/pwrsx/ show identify

/cx/ex/pwrsx set identify=on|off

/cx/ex/tempx show

/cx/ex/tempx/ show identify

/cx/ex/tempx set identify=on|off

/cx/ex show

This command is used with the 9690SA controller.

This command shows summary information on the specified enclosure cx/ex.

This report consists of several parts, depending on the available elements of

the enclosures. Typically, the summary consists of the Enclosure section

listing the set of enclosures, a Fan section listing the set of fans, a

Temperature Sensor section listing of the set of temperature sensor, a Power

Supply section listing the set of power supplies, and a Slot section listing the

set of slots.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 109 110

Keine Kommentare

AMCC 3WARE 9590SE Betriebsanweisung Seite 97