AMCC 3WARE 9590SE Betriebsanweisung PDF herunterladen (Seite 58)

Chapter 2. CLI Syntax Reference

52 3ware Serial ATA RAID Controller User Guide

Example:

//localhost> /c0 update fw=/tmp/prom0006.img

Warning: Updating the firmware can render the device driver and/or management

tools incompatible. Before you update the firmware, it is recommended that

you:

1) Back up your data.

2) Make sure you have a copy of the current firmware image so that you can

roll back, if necessary.

3) Close all applications.

Examining compatibility data from firmware image and /c0 ...

Done.

New-Firmware Current-Firmware Current-Driver Current-API

----------------------------------------------------------------------

FE9X 3.05.00.005 FE9X 3.05.00.005 2.26.04.007 2.01.00.008

Current firmware version is the same as the new firmware.

Recommendation: No need to update.

Given the above recommendation...

Do you want to continue ? Y|N [N]: y

Downloading the firmware from file /tmp/prom0006.img ... Done.

The new image will take effect after reboot.

force attribute is optional. If you include it, the compatibility checks are

bypassed.

add rebuild=

ddd:hh:duration

This command adds a new background rebuild task to be executed on the day

ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at the hour hh

(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of

seven rebuild tasks can be scheduled. This command will fail if no (empty)

task slot is available.

Example:

//localhost> /c1 add rebuild=Sun:16:3

adds a rebuild background task schedule to be executed on Sundays at 16

hours (4:00 PM) for a duration of 3 hours.

Setting Up a Rebuild Schedule

Setting up a rebuild schedule requires several steps, and several different CLI

commands in addition to /cx add rebuild.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 109 110

Keine Kommentare

AMCC 3WARE 9590SE Betriebsanweisung Seite 58